Tangle Time

I tangled today.

We had a costume contest at work. We were supposed to dress up based on our favorite collection. I was set to do retro kitchen (hence making cookies last night) but my dress no longer fits. So I changed things up to be inspired by the Designer's Domain collection. I busted out my art apron (totally different than my cooking apron, which is super cute), some pens, paintbrushes, charcoal, paint and the like. I stuck a bunch of paintbrushes in my hair and put on my glasses.

I showed up for work being comfy and ready to make art. Oh and I brought cookies. Because I'm rad like that. The whole office was able to enjoy them, which was nice. I know a few people have dietary restrictions and don't normally get to partake in treats. My cookies were grain free and vegan. Perhaps if you are lucky, I will eventually share the recipe.

I have to say we had some pretty good costumes for those of us who dressed up. Film Noir, Retro Reboot, Swiss Ski Chalet and even New England Clambake were represented.

One coworker dressed for Retro Reboot and pretty much clinched the title when she busted out her Nintendo Powerglove as her finishing accessory. There were a couple of people who had no clue what it was. Hopefully we can use it for company game night.

I didn't spend anytime with M0rt tonight. Taking a step back and allowing my frustration to subside. When I sent my inital email to Craftwell, I got a prompt response the next day telling it it was likely user error causing my issues. Well, I sent off all three videos (ecraft issues, mtc test and mtc results) and haven't heard anything back from Craftwell yet.

We'll see what happens. That file should not be beyond the capabilities of M0rt. I had a similar issue when cutting our wedding invitations as well and those were 5x7 rounded rectangles. 2 to a sheet of paper. Are you going to tell me that project is too much for it to handle as well? I hope not.

It's well beyond Amazon's return window. Perhaps I should have gone with the Cameo, which was my original plan.

That being said. I still need a laser.

Zentangle.......

But I'm really not sure what day to call it. I think it would be #38 based upon the sequence from when I was doing it daily. While I haven't been doing a tangle daily, I have been "making" daily. "Time Goes By" took quite a few days of work and layout to get it all assembled and framed.

We also went to the Elder Gnome's home to do some metal casting. That was pretty rad and a few more crucibles have been obtained. Which means more metal types. Which means brass. I need to figure out some modeling software and make something for my gramps. Every time I see brass, I think of him. Before his hands (and head) started bothering him a lot, he spent a lot of time buffing brass. Every time we include antique brass items in a collection at work, I think of my gramps! He should have been buying up used brass and selling it on Etsy! We sell so much brass (and throw pillows, which I still don't get the point of).

I did tangle today. I went in to work late so I could help Justin with some additional rack installation and got home around 8. I did some yoga (I highly recommend myyogaworks.com for home practice - there's a lot of variety and it costs less than drop in at a single class!).

I had a thought recently about homeless people. Perhaps they are so fried in part due to dehydration (it can make you pretty weird). They are often wearing 5-6 layers of clothes, they drink mostly alcohol (I've never seen a bum drink a bottle of water) and they are exposed to the elements all the time. Something to think about.

Time for bed.

365 Days of Zentangles - Day 37

Day 37! I did it. And a bunch of other stuff this weekend too. I swear sleep was what I needed. It was the first weekend I didn't feel stressed about work, which made my weekend that much better.

I battled ants yesterday in the garden. I tried to make muffins (fail). I succeeded in making tiny pumpkin pies. I doubled down on the tangles yesterday. I did something else but am not entirely certain what it was.

Today I got up and did yoga for an hour. I made coffee. I sat on the porch and drank said coffee while reviewing for my Contemporary Art midterm that is tomorrow night. I made a slideshow of all the pieces I may be tested on for that class (not sure why people make flashcards anymore, putting together a slide show is much more efficient). Started this project:

I've had this vision in my head for a couple of weeks now. When it is finished, I am going to mount it in a shadowbox frame.

This is where I got today:

I'm using M0rt for this project. I read a lot of people's complaints on the forums over at Craftwell. "it's not mat free. You have to use something." "It's ripping my paper." "It doesn't work right" "I should have kept my Cricut"

Having used a Cricut for work and having used M0rt, I have to say I like the e-craft (M0rt) more than the Cricut.

First things first, the cutting mats. e-craft is a "matless" cutting system, meaning it doesn't require consumable sticky mats that are a proprietary design and you don't need to buy a new one every couple of projects. Cost aside (they range from $7-$12/ea), they stink. They have an odor I cannot stand. It's repulsive. If I had to smell that every time I wanted to make anything, I'd get rid of the machine. Paper stick to the mats horrendously (I ended up losing a large number of cuts to the mat alone). Hair sticks to the mats. Dust sticks to the mats. It's gross.

The e-craft (M0rt) is matless in the sense it doesn't require a sticky mat. Some materials will need a "carrier" though. Light weight paper, fabric, cellophane, things like that will need a "carrier". What's a "carrier" and how is that different than a mat? The carrier can be anything that is thicker and sturdier than the paper in question. When I need a carrier, I just use the chipboard or lightweight cardboard from the back of a paper stack with a bit of Scotch "blue" tape (removable tape) to keep the edges down. I'm re-purposing materials, which is a big part of LaserGnomes.

I have to say that both M0rt and the Cricut actually aren't that rad for cutting really detailed pieces. Both end up having a bit of blade drag (which I have observed a way around, but can't exactly figure out what the eCraftShop Pro does to calculate a cut path). That being said, as frustrating and wasteful as it sounds, you ultimately need to have a new blade every 5 sheets of paper or so. In one of my art classes, we were told to use a new x-acto blade for EVERY CUT in order to attain the best results and cleanest cuts possible. Mind you, we were masking areas off with frisket for renderings and that takes a ton of cuts. This is the equivalent of that.

Cricut blades are about $10 for a 2 pack, whereas e-Craft blades are $22 for a 20 pack. This makes switching blades out a lot less painful.

There are some other reasons I really love M0rt that I will get into another day. It seems like a lot of the people who complain that it's not a Cricut are people who just want to push a button and choose from predetermined designs. Not how I want to craft, but hey, to each their own, right?

365 Days of Zentangles - Day 31

I've had skulls on my mind all day. I have this brilliant project I want to do but I have school on Monday and Tuesday and I need to study for midterms next week. BLAH BLAH BLAH. so mad.

This is my collection of black pens (I think there are about 20 pictured). And this isn't even all of them. I have more. I have a really great set of Rapidographs ($200 for  set of 5 pens? Yes. But they are refillable. And you can buy new nibs). I got them during my drafting class. Microns were recommended but seriously, they didn't get the job done for that class. Construction lines ultimately need to be hairline and even the finest Micron could get it right.

Of course, I go look up that same pen set now on Utrecht and it's on sale for $89. If you draw, get this. If you need a gift idea for me. Get this. I'll be honest, I'm really trying to run out all of my black pens. This project should be perfect for it.

Oh and where was this set when I was 12 and OBSESSED with calligraphy?

Oh, my amazon subscribe and save shipments arrived today. That means pie can happen this weekend. I've got sunflower seeds and arrowroot powder (oh and coconut milk, shredded coconut and coconut flour).

365 Days of Zentangles - Day 30

Day 30! I had to go on an epic journey to find some place to get a money order, so that ate a good portion of my morning (I didn't get Placerville apples).

I made a killer coconut banana mousse (I had planned it out to be pie filling, but am currently out of arrowroot - I made it anyway to test the flavor/texture).

I finally listed cupcake toppers in our Etsy store,

Justin posed an interesting question to me about the current project. Could the tangles be adapted to a 3D model environment, therefore allowing me to create 3D sculptures daily.

I don't know any organic modeling software, so I'm on the hunt to find one that I can learn easily.

I checked out the 123D suite from Adobe today, thinking "oh awesome. 123D Design would be an enhancement over some of the limitations in TinkerCAD. It's not.

There is no import/export feature. I use illustrator to create a lot of my line art and import into TinkerCAD. I thought "woo, I can add chamfers and fillets using 123D Design" Nope. Not at all. Because I can't bring my work from illustrator (another Adobe product) into the app.

So then I was thinking "oooo 123D Sculpt could be an option for this idea of digital tangles to print." To my dismay, it is only available for iPAD. WTF? Seriously? It can't be utilized as a web app? It can't be made available to android? No thanks. I'm not a fan of anything that is iOS only.

Keep an eye out for reviews of various entry level 3D tools. I'm pretty good with the 2D and illustration, but AAU's IDS program didn't really have a huge emphasis on 3D modeling (it was very much still grounded in the olden ways of hand rendering and hand modeling). 3D printing was entirely glossed over in my production processes class.

365 Days of Zentangles - Day 15

Our community garden group was supposed to have an open house today. It rained (Yay! it makes SF far more tolerable), so we had to cancel.

Instead, Justin and I spent the afternoon at the vet with Pi. We're not entirely certain what happened to her foot but it looks like this:

Of course, she had hair on her foot this morning and it was actually even more swollen than this when we got up. There happened to be a few pain killers left from when she had her teeth cleaned in July, so I gave her one before we took her to the vet.

It's not broken (there were no visible fractures in the xray, which I will post later because they look cool). So we've got a week of antibiotics, anti-inflammatories and pain meds.

We think her toe might have been caught in the blanket (crocheted) or in the speaker grill of the ugly chair upstairs.

Oh, we also went to Blick (no purse - last time they told us all bags, including purses have to be checked. I asked if we had to check our pants because we had pockets. They didn't think it was as funny as I did.) I got some transfer paper to try out.

As much as I had hoped to get all sorts of design work done today, I wanted to bake. And bake I did. Best GF pie ever.

365 days of zentangles - day 9

We got a lot done today. Barn is pressure washed and sealed. Zentangle is done. Quality time with my grandparents, cousins and husband.

Played some rousing games of scavenger hunt and eye spy.

Almost time to hit the road.